DOI:

Keywords:

Low Density Polyethylene, Polystyrene, Plastic Waste, Rheological Properties, Sustainability

Abstract

The issue of managing plastic waste has become a serious global concern, driving researchers to explore practical and sustainable recycling alternatives. One promising approach is incorporating plastic waste into asphalt binders for road construction. This study aims to evaluate the physical characteristics of asphalt binders modified with plastic waste polymers, specifically Low-Density Polyethylene (LDPE) and Polystyrene (PS), to enhance pavement performance while supporting environmental sustainability. In this research, different proportions of plastic waste (2%, 6%, and 10%) were blended with conventional 60/70 penetration grade bitumen using the wet mixing method. The modified binders were then tested for penetration and softening point according to Malaysian Standard (MS 124). The results showed that plastic modification reduced penetration values and increased softening points, indicating higher stiffness and improved resistance to high temperatures. Among the modifiers, LDPE exhibited the most significant improvement, while the PS+LDPE blend provided a balanced performance between flexibility and strength. These findings align with previous studies which reported that polymer-modified bitumen improves thermal stability and rutting resistance. Overall, the study demonstrates that the use of plastic waste as a bitumen modifier enhances the performance of asphalt binder and contributes to more sustainable road pavement development.

References

Airey, G. D. (2003). Rheological properties of styrene butadiene styrene polymer modified road bitumens. Fuel, 82(14), 1709–1719. https://doi.org/10.1016/S0016-2361(03)00146-7

Aldaihan, N. A., Al-Mutairi, N. S., & Al-Zahrani, M. M. (2021). Use of recycled plastic waste in modified bitumen: Physical, chemical and rheological properties. Sustainability, 13(3), Article 1303. https://doi.org/10.3390/su13031303

Department of Standards Malaysia. (2014). MS 124: Petroleum bitumen for road works—Specification (2nd rev.). Standards Malaysia.

Jassim, A. M., Al-Attar, M., & Al-Hadithi, A. I. (2020). Properties of bituminous binders modified with plastic wastes. Materials Today: Proceedings, 33, 551–555. https://doi.org/10.1016/j.matpr.2020.04.117

Lu, X., & Isacsson, U. (2000). Modification of road bitumens with thermoplastic polymers. Polymer Testing, 20(1), 77–86. https://doi.org/10.1016/S0142-9418(00)00021-3

Nizami, M., Qadir, A., & Zain ul Abdin. (2021). Evaluation of polymer-modified asphalt binders using conventional and rheological tests. Materials Today: Proceedings, 51(1), 1676–1682. https://doi.org/10.1016/j.matpr.2021.05.523

Polacco, G., Filippi, S., Merusi, F., & Stastna, J. (2006). A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility. Journal of Colloid and Interface Science, 299(1), 1–19. https://doi.org/10.1016/j.jcis.2006.01.051

Yao, H., You, Z., Li, L., Lee, C. H., Wingard, D., Yap, Y. K., Shi, X., & Goh, S. W. (2014). Performance of asphalt binder modified with waste plastic. Construction and Building Materials, 52, 486–492. https://doi.org/10.1016/j.conbuildmat.2013.11.019

Yaseen, M., Ahmed, S., & Tariq, M. (2022). Performance of bituminous mixtures containing plastic waste: A review. Journal of Cleaner Production, 341, Article 130725. https://doi.org/10.1016/j.jclepro.2022.130725